LED display resolution calculation method, LED display is divided into two types: indoor and outdoor, outdoor is mainly suitable for long-distance viewing, the pixel density does not need to be too high, indoor LED display is mainly used in stage background, conference room, hotel banquet hall, For places such as the front desk, due to close viewing and the area of the LED screen cannot be too large due to environmental restrictions, there are higher requirements for resolution. It is very simple to calculate the resolution of the LED display, divide the length and width by the pixel pitch, and the resolution will come out. For example, to make an indoor LED display with a width of 5.76 meters, a height of 3.072, and a pixel pitch of 3mm, the actual pixels are 1920×1024.
Sometimes it is necessary to choose the LED display specifications according to the pixels. If a P2.5 display is made according to 1024×768 pixels, then the calculation method is 1024 pixels×2.5 spacing=2.56 meters, and the height is 768 pixels×2.5 spacing=1.92 rice. The calculation method is the same for indoor and outdoor even for small pitches. When choosing an LED display, you should pay attention to three factors: viewing distance, pixels, and size. These three factors affect each other. The above full-color LED display calculation method hopes to help you! .