The installation method of full-color LED display should be designed and produced according to the site environment. The common installation methods are wall hanging, hoisting, column, mosaic, etc. The installation of indoor full-color LED display is relatively simple, and outdoor full-color LED display is considered It is perfectly integrated with the on-site environment, and the waterproof requirements will be higher. Outdoor full-color LED displays are usually mainly for advertising, and most of them are fixed installations. The common installation methods are wall-mounted and column-mounted. If used in road scenes, they can be made into F poles or bridge-type hoisting or seat squatting on the bridge frame. Outdoor full-color LED displays During the installation of the color LED display, it is necessary to consider the convenience of waterproof, heat dissipation and maintenance methods. Sufficient preliminary planning can avoid unnecessary maintenance costs in the future. Finally, let’s talk about the characteristics of indoor full-color LED display installation. The first is whether the installation location is on the wall or a truss needs to be built. If it is installed against the wall, you can weld a frame to fix it on the wall, and the LED module is directly magnetically attracted to the frame. On the top, the last four sides can be wrapped. This method is easy to maintain in the future, and the installation speed is also fast and the cost is relatively low.
If it is a stage, you can also use the method of sticking to the wall. Some stages need to reserve pedestrian passages behind the stage, so you must build trusses. This kind of full-color LED display can be installed in a post-maintenance method, that is, it can be installed in a box. Advantages It is easy to disassemble and can be used in another place. .