Outdoor Highlight Case
VR

┃ Product Description


Enbon FC-B series is a kind of LED display screen for outdoor fixed front and back service. High brightness for more than 6000nits, bringing full colorful images for audiences. The feature of energy saving brings less fee cost. Installation without wires decreases additional costs. Front maintenance has SMD and DIP modules, creating more possibilities for display installation, it not only has two cabinet installation types-fixed installation and Hanging, but also its cabinet maintenance has front and rear maintenance two ways. High advanced technology makes our product with efficient heart disspation.


┃ Product Parameters


Pixel PitchOutdoor: 4, 5.33, 6.67, 8, 10,16
LED lampOutdoor: P4=SMD2727

P5.33=SMD2727

P6.67=SMD2727

P8=SMD2727

P10=SMD2727

P16=SMD2727

BrightnessOutdoor:P4=6000nits

P5.33=6000nits

P6.67=6000nits

P8=6000nits

P10=6500nits

P16=8500nits 

Module pixelOutdoor:P4=80*80dots

P5.33=60*60dots

P6.67=48*48dots

P8=40*40dots

P10=32*32dots

P16=20*20dot

Cabinet pixelOutdoor:P4=240*240dots

P5.33=180*180dots

P6.67=144*144dots

P8=120*120dots

P10=96*96dots

P16=60*60dots

Module size

Outdoor:P4=320*320mm

P5.33=320*320mm

P6.67=320*320mm

P8=320*320mm

P10=320*320mm

P16=320*320mm

Cabinet sizeOutdoor:P4=960x960x120mm

P5.33=960x960x120mm

P6.67=960x960x120mm

P8=960x960x120mm

P10=960x960x120mm

P16=960x960x120mm

Module weightOutdoor:P4=1.6kg

P5.33=1.6kg

P6.67=1.6kg

P8=1.6kg

P10=1.5kg

P16=2kg

Cabinet Weight

Outdoor:P4=30kg

P5.33=30kg

P6.67=30kg

P8=30kg

P10=30kg

P16=32kg

Storage Temperature - 40 ℃ ~60 ℃
Operation Temperature- 20 ℃ ~50℃ 
Storage Humidity10% ~ 90%
Operation Humidity10% ~ 90%
Gray scale14bits
Gray Scale per Color16384level
Refresh Rate ≥1920Hz
Max Power

Outdoor:P4=800w/sqm

P5.33=850w/sqm

P6.67=800w/sqm

P8=850w/sqm

P10=700w/sqm

P16=400w/sqm

Average Power

Outdoor:P4=300w/sqm

P5.33=380w/sqm

P6.67=300w/sqm

P8=380w/sqm

P10=240w/sqm

P16=130w/sqm

IP rating Outdoor:IP54/IP65
Drive Mode 

Outdoor:P4=1/10

P5.33=1/8

P6.67=1/5

P8=1/4

P10=1/2

P16=Static

Viewing Angle

Outdoor:P4=140/140(H/V°)

P5.33=140/140(H/V°)

P6.67=140/140(H/V°)

P8=140/140(H/V°)

P10=140/140(H/V°)

P16=110/60(H/V°) 

AC input voltageAC 110/ 220V ± 10%
AC input frequency 60Hz
DensityOutdoor:P4=62500dots/m2

P5.33=35344dots/m2

P6.67=22500dots/m2

P8=15625dots/m2

P10=10000dots/m2

P16=3096dots/m2

Cabinet MaterieDie-casting Aluminum


 Product Display


┃ FQA


Q: What method do you use to improve luminance and color uniformity?

A: The most important thing is to find out is what your screen manufacturer does to fix the inherent non-uniformity issues found in all LEDs. The method that yields the best results is the PWM correction method, and it often produces a screen that is cheaper than extreme binning methods, because the screen manufacturer does not need to purchase such tight binning lots from the LED manufacturers in order to achieve uniformity. Also, it enables the user to recalibrate the screen as the LEDs become dimmer over the course of several years.


Q: Are correction coefficients used for each pixel or only for each module?
A: For best results, correction coefficients should be provided for each pixel. Correction coefficients for the module can reduce or eliminate the patchwork quilt effect that shows modules with different brightness and color, but it cannot completely remove the boundary differences between different modules and will do nothing to eliminate the dirty window effect caused by pixel-to-pixel uniformity differences


Q: How many correction coefficients are used for each pixel?
A: It is possible to produce correction only for luminance and white point. A screen of this type will use 3x1 correction coefficients (3 coefficients for each pixel). A full color corrected screen will use 3x3 coefficients (9 coefficients for each pixel).


Q: Are the PWM coefficients stored in the modules in addition to storing them in the video controller?
A:The coefficients need to be stored in the video controller in order to perform the video signal processing; however, it is also very convenient to store them in a type of flash memory on the module. This not only provides a backup for the coefficients, but it also enables the module to automatically update the coefficient database in the video controller when it is moved or replaced.


Shipping & Packaging


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Contact Us | Enbon

If you are interested in our products for large commercial display solutions, please contact us.

Our team will give you the best service thanks so many.

Feel Free | Contact Enbon

The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.

Recommended | Enbon

They are all manufactured according to the strictest international standards.

Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Send your inquiry

Choose a different language
English English français français italiano italiano 日本語 日本語 한국어 한국어 Português Português русский русский Беларуская Беларуская বাংলা বাংলা हिन्दी हिन्दी Tiếng Việt Tiếng Việt Türkçe Türkçe ภาษาไทย ภาษาไทย العربية العربية Deutsch Deutsch Español Español
Current language:English